Janome Hemmer Feet 4mm & 6mm

The Janome Hemmer Feet 4mm & 6mm set gives you professional control over narrow rolled hems on everything from lightweight cotton shirttails to heavier table linens and decorative frills. This dual-size set includes both a 4mm and 6mm hemmer foot, each designed with a scroll-shaped feed and straight underside groove that automatically rolls and stitches clean, consistent hems without pinning or hand-basting.

Key Features

• Includes both 4mm and 6mm hemmer feet for versatile hem widths on a range of fabric weights
• Scroll-shaped feed on top guides fabric smoothly into a rolled edge as you sew
• Straight groove on the underside maintains consistent hem width throughout the seam
• Handles heavier fabrics better than narrower hemmer feet, making it ideal for home décor and table linens
• Creates professional rolled hems on shirt tails, napkins, tablecloths, scarves, and ruffles
• Eliminates the need for hand-basting or pinning narrow hems before stitching
• Compatible with a wide range of Janome top-loading and front-loading machines

Specifications

The Janome Hemmer Feet 4mm & 6mm set is essential for sewists who want crisp, professional hems on garments and home décor without the tedious prep work, and the dual sizes give you flexibility across fabric weights and project types. Janome backs this machine with a 25-year mechanical warranty, 2-year electrical warranty, and free parts and labor during the first year. OSP Machines is an authorized Janome dealer and provides free support for the life of your machine.

• 2030DC-T
• 2030QDC-B
• 3160PG
• 3160QDC-B
• 3160QDC-T
• 3160QOV
• 4120QDC 1
• 4120QDC-B
• 4120QDC-T
• 4300QDC
• 49018
• 49360
• 5124
• 5300 QDC-T
• 5812
• 6019QC
• 6050
• 6100
• 6125QC
• 6260QC
• 6300P
• 661
• 712T
• 8050
• 8077
• AMH M100
• C30
• C30W
• Classmate S-750
• DC1018
• DC1050
• DC2012
• DC2013
• DC2014
• DC2015
• DC2015
• DC2019
• DC3050
• DC4030P
• DC5100
• HD-3000
• HD-3000 Black Edition
• HD-5000
• HD5000BE

• Frequently Asked Questions

  What is the difference between the 4mm and 6mm hemmer feet?

  The 4mm hemmer foot creates a narrower rolled hem ideal for lightweight fabrics like cotton shirting and fine linens, while the 6mm hemmer foot produces a slightly wider hem that works better on medium-weight fabrics and provides more durability for items like table linens and heavier garments.

  What types of fabric work best with these hemmer feet?

  These hemmer feet work best on lightweight to medium-weight woven fabrics such as cotton, linen, rayon, and lightweight wool. They are not recommended for knits or very heavy fabrics like denim or canvas, as the fabric needs to feed smoothly through the scroll to create the rolled edge.

  How do I know if these hemmer feet will fit my Janome machine?

  These hemmer feet are compatible with Janome machines that use a top-loading or front-loading bobbin system and a standard presser foot shank. Check the compatibility list on this page, or contact OSP Machines for confirmation that these feet will work with your specific model.

  Do I need special thread or needles to use a hemmer foot?

  You can use standard all-purpose thread and a universal or sharp needle appropriate for your fabric weight. A smaller needle size (60/8 or 70/10) often works best for lightweight fabrics, while a 80/12 is suitable for medium weights. Use a shorter stitch length (1.5-2mm) for best results.

  Is the hemmer foot difficult to use for beginners?

  Hemmer feet require a bit of practice to master the technique of feeding fabric into the scroll, but most sewists get the hang of it after a few test runs. Start with a scrap piece of fabric, trim the edge at an angle to help it feed into the scroll, and sew slowly until you develop a rhythm.