Description
The BERNINA Knee Lifter Extended Length is designed for BERNINA machine owners who sew with their machine mounted in a cabinet. While the standard BERNINA knee lifter measures 6 inches from the machine, this extended version adds 3 inches for a total shaft length of 9 inches — giving you the clearance needed to comfortably operate the knee lift when the extra depth of a cabinet is between you and the machine. The result is the same hands-free presser foot control you rely on, without awkward reaching or compromised posture.
Key Features
- Extended 9-inch shaft length accommodates the added depth of sewing cabinets, compared to the standard 6-inch length.
- Allows you to raise and lower the presser foot hands-free using your knee, keeping both hands on the fabric at all times.
- Compatible with a wide range of BERNINA machines, excluding the newer 8 Series and L Series models.
- Improves accuracy and control during quilting, appliqué, and any project that requires frequent fabric repositioning.
- Reduces physical strain during long sewing sessions by eliminating the need to repeatedly reach for the presser foot lever.
- Direct replacement or upgrade from the standard BERNINA knee lifter for cabinet-mounted setups.
Specifications
| Specification | Detail |
|---|---|
| Shaft Length | 9 inches (extended) |
| Standard Knee Lifter Length | 6 inches |
| Additional Length Over Standard | 3 inches |
| Compatibility | Most BERNINA machines (excludes newer 8 Series and L Series) |
| Primary Use | Cabinet-mounted BERNINA sewing machines |
This extended knee lifter is the practical solution for any BERNINA sewist who works from a cabinet and wants full hands-free presser foot control without compromise. OSP Machines is an authorized dealer and provides free support for the life of your machine. If you have questions about fit or compatibility with your specific BERNINA model or cabinet setup, our team is here to help.
Compatible with:Frequently Asked Questions
- What is the difference between the standard BERNINA knee lifter and this extended version?
- The standard BERNINA knee lifter has a shaft length of 6 inches coming out of the machine. This extended version measures 9 inches — 3 inches longer — making it the right choice when your machine is mounted in a sewing cabinet, where the cabinet depth would otherwise make the standard length difficult or impossible to reach comfortably.
- Which BERNINA machines is this knee lifter compatible with?
- This extended knee lifter is compatible with most BERNINA sewing and quilting machines, including models in the 3, 4, 5, 6, and 7 Series. It is not compatible with the newer BERNINA 8 Series machines or the L Series. If you are unsure whether it fits your specific model, contact OSP Machines for confirmation before ordering.
- Do I need a special cabinet for this knee lifter to work?
- You do not need a specific brand of cabinet, but this extended knee lifter is intended for any setup where the machine sits recessed into or mounted within a cabinet that adds depth between the knee lift port and your knee. If your machine sits on an open table or desk, the standard-length BERNINA knee lifter is likely the better fit.
- Is this an official BERNINA accessory, and does it come with a warranty?
- Yes. OSP Machines is an authorized BERNINA dealer. OSP Machines is an authorized dealer and provides free support for the life of your machine.
- Can I use this knee lifter for quilting and free-motion work?
- Absolutely. The knee lifter is especially useful for quilting, free-motion embroidery, and appliqué — any technique where you need to reposition fabric frequently without stopping to use the presser foot lever. The extended length simply ensures you have that same hands-free convenience when working from a cabinet-mounted setup.
Warranty Information
Additional Information
skill_level: |
Beginner to Intermediate |
Shipping: |
Free shipping on all orders |
Returns: |
Free 30-day returns |
